SUNLU Nylon-6 Carbon Fiber (PA6-CF) 3D Printer Filament 1KG
Quick Overview
- Filament Type: Nylon-6 Carbon Fiber (PA6-CF)
- Composition: 80% PA (Nylon 6) with 20% Carbon Fiber
- Spool Weight: 1KG
- Filament Diameter: 1.75mm
- Dimensional Accuracy: ± 0.03mm
- Key Features: Remarkable stiffness, high strength, superior heat resistance, and excellent layer adhesion.
- Heat Distortion Temperature: Up to 209°C
- Required Nozzle: Abrasion-resistant (e.g., hardened steel)
- Pre-printing Requirement: Must be dried before use (80°C for 24 hours or 110°C for 4 hours).
- Recommended Print Temperature (Nozzle): 270°C – 280°C
- Recommended Bed Temperature: 100°C (requires PVA glue or Magigoo PA)
- Recommended Print Speed: 50-150mm/s
- Post-Processing (Annealing): Essential for max heat resistance (80-130°C for 5-12 hours).
SUNLU PETG 3D Printer Filament 1KG
Quick Overview
- Filament Type: PETG
- Filament Diameter: 1.75mm
- Dimensional Accuracy: ± 0.02mm
- Winding: 100% Neatly Wound
- Key Feature: High strength, good toughness, and heat resistance.
- Recommended Print Temperature : 220°C – 250°C
SUNLU PETG-CF (PETG Carbon Fiber) 3D Printer Filament 1KG
Quick Overview
- Filament Type: PETG Carbon Fiber (PETG-CF)
- Composition: PETG infused with 10% Carbon Fiber
- Spool Weight: 1KG
- Filament Diameter: 1.75mm
- Dimensional Accuracy: ± 0.03mm
- Key Features: Exceptional strength, stiffness, dimensional stability, and a sleek matte finish.
- Impact Strength: 19 kJ/m2
- Heat Distortion Temperature: 70°C
- Recommended Print Temperature (Nozzle): 240°C – 250°C
- Recommended Print Speed: 50 – 150mm/s
- Recommended Bed Temperature: 70°C – 80°C (if heated; can print unheated with glue)
- Nozzle Requirement: Requires an abrasion-resistant nozzle (hardened steel, etc.)
SUNLU PLA 3D Printer Filament 1KG
Quick Overview
- Product Type: PLA 3D Printer Filament
- Filament Diameter: 1.75mm
- Dimensional Accuracy: ± 0.02mm
- Filament Winding: 100% Neatly Wound
- Recommended Print Temperature (PLA): 195°C – 220°C
- Compatibility: Fits most FDM 3D printers
SUNLU PLA+ 3D Printer Filament 1KG
Quick Overview
- Product Type: 3D Printer Filament PLA+
- Filament Diameter: 1.75mm
- Dimensional Accuracy: ± 0.02mm
- Winding Technology: 100% Neatly Wound (No Tangle/Knot)
- Enhanced Strength (PLA+): Impact strength up to 8KJ/m2
- Printing Temperature (PLA+): 195°C – 220°C
- Recommended Print Speed (PLA+): Up to 300mm/s
- Print Quality: Clog/Bubble/Tangle/Warping/Stringing free
SUNLU TPU 95A 3D Printer Filament 1KG
Quick Overview
- Filament Type: TPU Flexible Filament (Thermoplastic Polyurethane)
- Hardness Options: Harder, Moderate Flexibility
- Filament Diameter: 1.75mm
- Dimensional Accuracy: ± 0.03mm
- Key Properties (General): High elasticity, resilience, and wear resistance.
- Recommended Print Temperature: 190°C – 230°C
- Recommended Print Speed:Â 50-120mm/s
- Plate Temperature: 50°C – 60°C
Online store of household appliances and electronics
Then the question arises: where’s the content? Not there yet? That’s not so bad, there’s dummy copy to the rescue. But worse, what if the fish doesn’t fit in the can, the foot’s to big for the boot? Or to small? To short sentences, to many headings, images too large for the proposed design, or too small, or they fit in but it looks iffy for reasons.
A client that’s unhappy for a reason is a problem, a client that’s unhappy though he or her can’t quite put a finger on it is worse. Chances are there wasn’t collaboration, communication, and checkpoints, there wasn’t a process agreed upon or specified with the granularity required. It’s content strategy gone awry right from the start. If that’s what you think how bout the other way around? How can you evaluate content without design? No typography, no colors, no layout, no styles, all those things that convey the important signals that go beyond the mere textual, hierarchies of information, weight, emphasis, oblique stresses, priorities, all those subtle cues that also have visual and emotional appeal to the reader.
Koorui
AOC